Professional Locking Wheel Nut Removal Service
MOBILE LOCKING WHEEL NUT REMOVAL SERVICE
LOST YOUR LOCKING WHEEL NUT KEY?
BROKEN OR DAMAGED YOUR LOCKING WHEEL NUT KEY?
WE GUARANTEE REMOVAL!
CALL US NOW ON 0800 772 3862
100% Success Rate
Guaranteed removal, every time
No Damage Caused
Zero damage to your alloys
Any Vehicle
Any type of locking wheel nut
Fast Service
Usually same or next day
Mobile Service
Home, work, garage, or roadside
Main Dealer Approved
Official service provider
LOCKING WHEEL NUT REMOVAL
Locking Wheel Nut Removers provide a mobile & appointment-based locking wheel nut removal service for ALL vehicle make's and models. We use specialist custom-made tools that will guarantee removal of ANY locking wheel nut or locking wheel bolt from ANY vehicle, even if they have been damaged or over-tightened.
​
Our London based call centre will put you through to one of our friendly locking wheel nut removers based throughout the UK, who are fully trained to remove any locking wheel nut or locking wheel bolt from your vehicle with no damage caused to the wheel or rim of the vehicle using our unbeaten system.
​
If you have lost, damaged, or broken your locking wheel nut key we can remove your lock nuts for you, we can even remove stuck sockets and snapped Jaguar wheel nuts! Our locking wheel nut removal service is fully guaranteed and fully mobile. One of our highly trained locking wheel nut removers will attend your vehicle at most locations across the UK and will remove the locking wheel nut or locking wheel bolt from your vehicle in a matter of minutes. Alternatively, you can visit one of our branches in and around London and Stoke-on-Trent to have your locking wheel nut or locking wheel bolt removed at a lower cost with our custom-made specialist tools (booking required).
We can remove your locking wheel nuts even when others have failed!
​
We have a 100% success rate for over 10 years!
​
We also specialise in snapped Jaguar wheel nut removal!
We have a huge stock of Genuine and Aftermarket locking nuts and locking wheel bolts that we can fit to your vehicle after the removal of the old ones. Our locking wheel nut and locking wheel bolt sets start from only £35. We are able to offer a cheaper price than the dealers as we buy them in bulk from the manufacturer. We can also provide standard wheel nuts/bolts if you would prefer to not have locking wheel nuts attached to your car, these start from only £3.75 per nut/bolt.
​
Our custom locking wheel nut removal tools are designed to remove any locking wheel nut or locking wheel bolt. We can even remove damaged spinning collar (McGard) lock nuts, as well as Citroen and Peugeot locking wheel bolts without causing any damage to the rim or tyre.
Citroen and Peugeot, as well as Jaguar and LandRover locking wheel nuts, are considered one of the hardest to remove, however, we have manufactured tools and methods that enable us to remove them effortlessly at any location nationwide.
LOCKING WHEEL NUT REMOVAL FROM £40*
MOBILE LOCKING WHEEL NUT REMOVAL FROM £60*
How To Remove Locking Wheel Nuts Without The Key
We do not use any tool that may damage your vehicle, our locking nut removal tool is specifically designed to remove any locking wheel nut or locking wheel bolt with minimal fuss and no damage. For more information or to book a locking wheel nut removal service and have one of our locking wheel nut removers attend your vehicle, call us now on 0800 772 3862 and speak to our London based call centre.
If you're in an emergency we can normally get a locking wheel nut remover with you that same day in the United Kingdom including in and around busy London. We can also remove stuck sockets that have been hammered over the locking wheel nut and subsequently got stuck on the rotating collar after a failed previous removal attempt.
​
Our London based call centre will put you through to one of our specialist locking wheel nut removers who can attend most locations in the UK, we cover most areas in the UK including London and all the surrounding areas. We also cover Manchester, Birmingham, Liverpool, Stoke-on-Trent, and most places in-between. please call us to see if we can attend your area. Alternatively, you can visit one of our 4 branches located in and around London or Stoke-on-Trent and we can remove the locking wheel nut for you on-site at a lower cost (please see our contact page for locations and our pricing page for prices).
Locking Wheel Nut Remover
Most locking wheel nuts and/or the key are damaged due to over-tightening. If you have damaged either the lock nut or the locking wheel nut key due to the nut being over-tightened, do not worry, we can remove the locking wheel nut or locking wheel bolt for you regardless of how tight they are. Most locking nut keys are made of thin mild steel, when put under extreme pressure the metal distorts causing the lock nut key to become distorted and unusable, in this instance, you will need a specialist locking wheel nut remover to remove them for you.
It is possible to obtain a new locking wheel nut key from the manufacturer provided you have the unique code (this would have been given to the registered keeper when the car was initially purchased). However, if the locking wheel nuts have been over-tightened a new locking nut key will also fail.
Most manufacturers charge around the same price for a replacement lock nut key as we do for the removal of your locking wheel nuts, making it more cost-effective to get your locking wheel nuts removed than it is to take a gamble on a new locking wheel nut key, which may end up failing. Plus the wait for a new locking wheel nut key is often in excess of 2 weeks. We always recommend that a new set of locking wheel nuts are installed after they have been over-tightened, as sometimes the threading on the bolt or nut can stretch making them unsafe to reuse.
​
40% of our customers have over-tightened locking wheel nuts due to a repair or service garage using air-guns to tighten their locking wheel nuts or locking wheel bolts. All lock nuts and bolts should be tightened by hand and torqued to the manufacturer's specifications using a torque wrench. An air-gun tool should never be used on a locking wheel nut or locking wheel bolt, in fact, air-guns/impact guns should only be used to loosen bolts or nuts on a vehicle, they do not have the accuracy to tighten any bolt or nut to specification.
Depending on what locking wheel nut key you have, the key can also cause distortion to the locking wheel nuts unique pattern. This usually happens when repeated failed removal attempts are attempted. This will also prevent a new locking nut key from working on that locking wheel nut and will require a specialist locking wheel nut remover to be able to remove them.
​
If you have a damaged locking wheel nut or damaged key, call us now for an easy solution to your problem.
​
Attempting to remove a locking wheel nut by drilling, welding, cutting, or chiselling the locking wheel nut can cause expensive damage to your rim, tyre, or other parts of your vehicle and is also very time-consuming (usually hours), and very rarely works. Our locking wheel nut removal service is completely safe and does not cause any damage. We will never damage a rim while removing your locking wheel nut or locking wheel bolt with our unique tools, also our average time to remove all four lock nuts is under 15 minutes.
​
Some people may even be tempted to knock a socket over the top of their locking wheel nut in an attempt to remove them. We highly recommend against this technique, as often the socket will get stuck on the locking wheel nuts rotating collar and it will just spin freely. Further to this you will then be unable to remove the now stuck socket from the locking wheel nut. However, if you do find yourself with this problem, we have you covered, as we also specialise in removing stuck sockets from locking wheel nuts too.
​
To prevent damage, it is advised to not attempt to remove a locking wheel nut or locking wheel bolt, DIY methods are invasive and very rarely work and end up costing more or even worse, cause damage. Call our specialist London based team of locking wheel nut removal experts for an easy, cost-effective way of removing your locking wheel nuts.
Mobile Locking Wheel Nut Removal
Call 0800 772 3862
Has your locking wheel nut been over-tightened? We specialise in removing locking wheel nuts and bolts that have been overtightened or damaged by the use of an air gun. Depending on what type of locking wheel nut you have, we have specialist custom-made tools for every situation.
We have seen pretty much every scenario of damaged or previous failed removal attempts, of almost every type of locking wheel nut. If you have a locking wheel nut or bolt that is difficult to remove, call the locking wheel nut remover now to get your locking wheel nuts or locking wheel bolts removed.
​
Please visit our results page or Instagram page to see proof of the type of damaged locking wheel nuts and locking wheel bolts that we remove.
​
We are the OFFICIAL locking wheel nut removers for many main dealers, tyre shops and repair garages click here to see some of our clients.
What Is A Locking Wheel Nut?
A locking wheel nut, lock nut, or locking nut as they are otherwise known, is a security bolt or nut that is attached to a vehicle's wheel to prevent the tyres and expensive alloys from being stolen. Usually, there is one locking wheel nut per wheel on the vehicle, so a standard car will have 4 identical locking wheel nuts attached to the wheels. The locking wheel nuts are released using a unique key, each key is different preventing someone else with the same key from being able to release your locking wheel nuts and being able to take your precious alloys.
Each key will unlock all 4 locking wheel nuts and they are supplied in a set when new, consisting of 4 locking wheel nuts and 1 key. Because of its uniqueness, it is extremely important to keep the key safe and to always have it in the vehicle in case of an emergency. Although theft of alloys is not so common nowadays, this is largely due to the fact that all alloys now have locking wheel nuts and this acts as a deterrent to thieves, who do not have the ability to release them. It is still highly recommended to have locking wheel nuts attached to your vehicle so that they are not stolen, as alloys and the tyres themselves are still worth a considerable amount of money.
Here are our top tips for keeping your locking wheel nut key safe:
-
Keep your lock nut key in the glove box or boot compartment.
-
When getting work done to your vehicle always ensure you are given your locking nut key back afterwards.
-
Buy a Hi-Vis locking wheel nut key bag to make it even easier to find.
-
Always keep the lock nut key in the vehicle in case of a puncture or other emergency.
-
Always ask the garage or whoever does work on your vehicle to tighten your locking wheel nuts by hand and to the correct torque setting.
By using the tips shown above, you will prevent unnecessary loss or damage being caused to your locking nut key. This will save you the unnecessary headache of having to have your locking nuts removed by a specialist locking wheel nut remover. However if you do find yourself in this situation, we are always on hand to help you remove your locking wheel nuts without damage.
Locking Wheel Nut Removal Service
A few testimonials from some of our customers:
"Just wanted to say a massive thank you! BMW failed to remove one of my locking wheel nuts and BMW wanted to drill the locking wheel nut out and said that it may cause damage. I called the locking wheel nut remover who said he could take it out in 5 minutes without any damage. True to his word it was out in under 5 minutes without damaging my BMW and he saved me a fortune. Many thanks. Steven - Wembley"
"Fantastic service. Got all of my locking wheel nuts off in under 20 minutes on my Range Rover. My local garage had my Range Rover for 4 days attempting to remove these pesky locking wheel nuts. Well worth the drive down to them. Paul - St Albans"
"Where do I start. My locking wheel nuts were over tightened and it had stripped the key to the point it would no longer work in any of my locking wheel nuts. I took my car to 3 different garages who attempted to remove my locking wheel nut, they all failed after keeping the car for a day or more. I called the Locking Wheel Nut Remover who said he will be able to remove it in a very confident voice. I arrived at his at 10:15 am he had taken all four of my locking wheel nuts off and I was on my way again by 11 am, we even had time for a chat and a coffee. You, sir, are a genius! Highly recommended to all! Simon - Twickenham"
"Just got home from the Locking Wheel Nut Remover after I lost my locking wheel nut key for my Jaguar. A great chap with a lot of knowledge. Took my locking wheel nuts off my Jaguar in a matter of minutes. If you ever lose your locking wheel nut key this is the man to visit. Charlie - Hemel Hempstead"
"I broke my locking wheel nut key trying to remove my locking wheel nut from my Peugeot. My local tyre shop had over tightened them and it caused my key to break. Locking Wheel Nut Remover came and took my locking wheel nuts off my Peugeot at my house with his specialist tool. Thank you for your great service. Mitul - Luton"
We can remove any locking wheel nut or locking wheel bolt from the following vehicle manufacturers:
Alfa Romeo, Alpina, Aston Martin, Audi, Bentley, BMW, Citroen, Dacia, DS, Ferrari, Fiat, Ford, Honda, Hyundai, Infiniti, Jaguar, Jeep, Kia, Lamborghini, Land Rover, Lexus, Lotus, Maserati, Mazda, McLaren, Mercedes, MG, Mini, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Rolls-Royce, Seat, Skoda, Smart, SsangYong, Subaru, Suzuki, Tesla, Toyota, Vauxhall, Volkswagen, Volvo and also any other Imported vehicle.
​
*Please see pricing page.